Aprilia Caponord Forum  

Go Back   Aprilia Caponord Forum > Aprilia Caponord Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions

Reply
 
LinkBack Thread Tools Display Modes
Old April 14th, 2014, 10:37 AM   #1
Junior Member
 
Joined: Apr 2014
From: Gainsborough
Posts: 17

Ignition Code

Hi

Has anyone done anything with the ignition code, on the capo 1200. Dealer told me not to worry about it, but the "code" message on dash flashes all the time.
Are you meant to set the code, as a one off or every time you start the bike?, it is not clear from the manual what its used for.

Any thoughts?

Daz
Darren Penny is offline  
Register

Welcome to the Aprilia Caponord Forum dedicated to the Aprilia Caponord.

We welcome everyone and the community is free to join so register today and become part of the Aprilia Caponord Forum family!

Old April 14th, 2014, 12:39 PM   #2
Junior Member
 
Joined: Mar 2014
From: Rushton, Northants
Posts: 22

Hi mate. I picked my bike up new on Saturday and had exactly the same issue. Rang Wheels Motorcycles and they told me that you have to enter your own code and it would go off.
It worked for me. Page 59 has the code you need to get into the menus and then you have to enter a new 5 digit code. Once done the very annoying Code thing doesn't flash.
Just hope you can figure out how to set the clock!!!.....took me ages.
Fergusdog is offline  
Old April 15th, 2014, 10:49 AM   #3
Junior Member
 
Joined: Apr 2014
From: Gainsborough
Posts: 17

Hi,

Nice one, I shall give it a go....know what you mean about the clock, the manual says press buttons A & B, think I ended up doing it by holding the mode switch in.

Cheers
Darren Penny is offline  
Reply

  Aprilia Caponord Forum > Aprilia Caponord Forum > Mechanical and Technical



Thread Tools
Display Modes



Copyright © 2012-2013 Caponord. All rights reserved.